Online analyzátory: EZ Series Analysers EZ Series Chloride Analysers

EZ Series Chloride Analysers

Pomoc
The EZ Series Online Analysers offer multiple options to monitor Chloride in water. Typical applications are wastewater, drinking water, steam & power generation, surface water.

The EZ1005 Analysers use colorimetric analysis to measure Chloride.
Standard measuring range: 1 - 10 mg/L

The EZ3000 Series Chloride Analysers use direct ISE analysis:
- EZ3003; standard measuring range: 1 - 10 mg/L
- EZ3004; standard measuring range: 10 - 100 mg/L
- EZ3005; standard measuring range: 100 - 1000 mg/L

The EZ3500 Series Chloride Analysers use ISE measurement with standard addition:
- EZ3503; standard measuring range: 1 - 10 mg/L
- EZ3504; standard measuring range: 10 - 100 mg/L
- EZ3505; standard measuring range: 100 - 1000 mg/L

The EZ4006 Chloride Analysers are single-parameter titrators:
Standard measuring range: 25 - 500 mg/L

Measuring range options:
- EZ1005: Internal dilution
- EZ30xx/35xx: Calibration to 25% (not EZ3003) or 50% of standard range
- EZ4006: Calibration to 10%, 25% or 50% of standard range

Options for all analysers include:
- Multiple stream analysis (1-8 streams) reducing cost per sampling point
- Analogue and/or digital outputs for communication

Some applications may require the use of a sampling/filtration or an external dilution system for sample preconditioning. For this option please check the EZ9000 Sample Preconditioning page.

Use the filters in the table below to find your online Chloride analyser. Need support or a different configuration? Please contact us.
 
 
Pre túto skupinu produktov nie sú k dispozícii žiadne produkty.