EZ3508sc Fluoride Ion-Selective Electrode (ISE) Standard Addition Analyser, 1 stream, 4x mA

EZ3508sc Fluoride Ion-Selective Electrode (ISE) Standard Addition Analyser, 1 stream, 4x mA
Kat. číslo produkta: EZ3508.9800140T
Jednotková cena bez DPH Kontaktujte nás

Consistent Results in Challenging Conditions

Fluctuating water quality often compromises conventional monitoring, leading to unstable readings. The EZ3508sc uses discontinuous and standard addition modes to compensate for these matrix interferences. You get accurate, continuous fluoride data for stable process control, even as conditions change.

Reduced Maintenance and Manual Effort

Gel-filled ion selective electrodes eliminate electrolyte refilling, while automated cleaning and calibration reduce routine service needs. Discontinuous standard addition method optimises buffer and reagent consumption; lowering site visits, operating costs, and overall maintenance effort.

Seamless Integration and Connectivity

Isolated data makes process control and reporting difficult. The integrated controller platform supports standard digital communication protocols for easy connection to your existing network. You gain immediate access to critical insights, supporting faster decision-making and remote troubleshooting.

Streamlined Operation and Usability

Complex instrumentation often leads to training bottlenecks and operational errors. The unified controller interface simplifies setup and daily interaction. Operators of any experience level can easily manage the system, reducing training requirements and preventing errors during routine checks.

Obsah balenia

EZ3508sc Fluoride Ion-Selective Electrode (ISE) Standard Addition Analyser, 1 stream, 4x mA, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 1 x ISE Electrode, 1 x empty 5L Reagent Container with Fittings (for F Standard Solution) and 1 x empty 10L Reagent Container with Fittings (for Buffer Solution)

Technické údaje

Analógové výstupy: Active 0 - 20 mA (or 4 - 20 mA) max. 500 Ohm load, standard 4, optional: 8
Automatické čistenie: Yes; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
Č. prúdov vzoriek: Standard: 1
Optional accessory for 2, 4, or 8 sample streams
Certifikácia: CE, ETL certified to UL and CSA safety standards, UKCA
Demineralised water: Internal dilution option: Rinse water and Dilution water
Detekčný limit: No dilution
0.2 - 10 mg/L Fˉ: 0.2 mg/L
0.5 - 25 mg/L Fˉ: 0.5 mg/L
1 -50 mg/L Fˉ: 1 mg/L
2 - 100 mg/L Fˉ: 2 mg/L

Internal dilution
10 - 500 mg/L Fˉ: 10 mg/L
20 - 1000 mg/L Fˉ: 20 mg/L
Digitálne výstupy: Relays: 5 contacts, not user configurable: Malfuntion, maintenance, analysis ready, sample ready, sample ready (EZ9150)

Ethernet Connections: Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP

RS485 communication: Profibus DP or Modbus RTU
Doba cyklu : No dilution
Default: 5 minutes
Continuous: 5 minutes

Internal dilution
Default: 10 minutes
Continuous: 8 minutes
Earth connection: Earth connection Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm²
Hmotnosť: Max. 35 kg
Instrument air: Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air. Used to flush the instrument in corrosive environement. Min. 0.2 bar - Max. 0.5 bar
Interferencie: Metal ions like aluminium [(Al)³+] > 72 mg/L, calcium [(Ca)²+] > 108 mg/L and iron [(Fe)²+/(Fe)³+] > 150 mg/L. Fats, oil, proteins, surfactants and tar.
Kalibrácia: Automatic; 2-point; offset or slope; Frequency freely programmable: 6 hours, 12 hours, daily, weekly. Note: manufacturer recommends that a calibration is done when the reagents are replaced
Kvalita vzorky: Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU
Materiál: Hinged part: Thermoform ABS, Door: PMMA
Wall section: Galvanised steel, powder coated
Metóda merania: Discontinuous measurement by combined Ion-Selective Electrode with standard addition
  Ion-Selective Electrode (standard addition)
Napájanie: 100 - 240 VAC, 50/60 Hz
Max. power consumption: 120 VA
Obsah balenia: EZ3508sc Fluoride Ion-Selective Electrode (ISE) Standard Addition Analyser, 1 stream, 4x mA, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 1 x ISE Electrode, 1 x empty 5L Reagent Container with Fittings (for F Standard Solution) and 1 x empty 10L Reagent Container with Fittings (for Buffer Solution)
Odtok: Atmospheric pressure, vented, min. Ø 32 mm
Parameter: Fluoride
Presnosť: Better than 2% full scale range for standard test solutions
Reagent Requirements: Keep between 10 - 30 °C
Rozmery (V x Š x H): 688 mm x 460 mm x 340 mm
Rozsah merania: No dilution
0.2 - 10 mg/L Fˉ
0.5 - 25 mg/L Fˉ
1 -50 mg/L Fˉ
2 - 100 mg/L Fˉ

Internal dilution
10 - 500 mg/L Fˉ
20 - 1000 mg/L Fˉ
Rýchlosť prietoku vzorky: 100 - 300 mL/min
Teplota prostredia: 10 - 30 °C ± 4 °C deviation at 5 - 95% relative humidity (non-condensing)
Teplota vzorky: 10 - 30 °C
Trieda ochrany: IP44
Validation: Automatic; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
Vzorka: tlak: By external overflow vessel (open to atmospheric pressure)
Záruka: 24 mesiacov